返回首页 | 加入收藏 | 关于我们 | 联系我们

欢迎光临济南广大铝业有限公司官网!

铝板生产企业 铝卷良心厂家

全国服务热线131-5601-1888
0531-87895188
当前位置:首页 » 济南铝板的上色步骤

济南铝板的上色步骤

文章出处:www.yarucopi.com 责任编辑:admin 发表时间:2014-12-19 17:53:12

济南铝板http://www.yarucopi.com/在上色之前,先要对铝板进行氧化,挤压好的铝合金型材,其外表耐蚀性不强,须经过阳极氧化进行外表处置以添加铝材的抗蚀性、耐磨性及外表的漂亮度。那么具体的上色步骤是怎样的呢?

1、济南铝板用化学或物理的办法对型材外表进行清洁,裸露出纯洁的基体,以利于取得完整、细密的人工氧化膜,还能够经过机械手法取得镜面或无光外表。
Jinan aluminum by chemical or physical methods of cleaning the outer profiles, bare pure base, to facilitate obtaining a complete, fine artificial oxide film, can also be achieved through mechanical manipulation specular or matt appearance.

2、济南铝板经外表预处置的型材,在必定的技术条件下,基体外表发作阳极氧化,生成一层细密、多孔、强吸附力的AL203膜层。
Jinan aluminum profiles look after pretreatment, in technical conditions must matrix anodized exterior attack to produce a layer of fine, porous, strong adsorption force AL203 film.

3、济南铝板http://www.yarucopi.com/将阳极氧化后生成的多孔氧化膜的膜孔孔隙关闭,使氧化膜防污染、抗蚀和耐磨性能增强。氧化膜是无色通明的,使用封孔前氧化膜的强吸附性,在膜孔内吸附堆积一些金属盐,可使型材外表闪现本性。
Jinan membrane pores of the porous aluminum oxide film produced after anodizing pores closed, so that the oxide film pollution, corrosion and wear resistance increased. Oxide is a colorless transparency, the use of the oxide film before sealing strong adsorption, adsorption accumulation in the membrane pores some salt, make profiles look flashed nature.

此文关键字:济南铝板
可以看黄的网站,可以看黄色的网站,可以看黄色视频的网站,可以看三级片的网站